Error Details
| Fact | Value | Source | Note |
|---|---|---|---|
| Exact error string | 0x8024402F (WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS) | WindowsUpdate.log / Event Viewer | Indicates external cab processing errors due to network issues |
| Affected build range | Windows 10, Windows 11 | OS Version Info | Applies to all supported builds using modern WUA |
| Registry key involved | HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings | Registry Editor | Contains proxy settings for SYSTEM account via WinHTTP |
| Relevant service/endpoint URL | windowsupdate.microsoft.com, download.windowsupdate.com | Network Traffic Analysis | Must be whitelisted and exempt from SSL inspection |
| Log line signature | Event ID 25 in System Log | Event Viewer > Windows Logs > System | Source: WindowsUpdateClient, indicates download failure |
Log Files to Check
%windir%\WindowsUpdate.logEvent Viewer > Applications and Services Logs > Microsoft > Windows > WindowsUpdateClient
What This Error Actually Means
The error code 0x8024402F, formally defined as WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS, is a deceptive identifier within the Windows Update Agent (WUA) architecture. While the literal translation suggests that external cabinet file processing completed with minor, non-fatal errors, in practical enterprise environments, this code almost invariably signals a catastrophic failure in the network transport layer or certificate validation during the download phase. The component raising this error is the Windows Update Client service (wuauserv), specifically when it attempts to validate the integrity of the update metadata or payload against the source server.
This error typically manifests when the client establishes a TCP connection but fails the TLS handshake or receives an invalid response from the proxy or firewall. The "Succeeded with Errors" nomenclature is a legacy artifact; in modern Windows 10 and Windows 11 builds, it indicates that the agent could not securely retrieve the update content due to network interference. It is distinct from generic download failures because it implies the client reached the endpoint but was rejected or blocked at the application/transport layer, often by SSL inspection devices that alter the certificate chain, causing the SYSTEM account to reject the connection as untrusted.
Affected Versions and Scope
This issue affects all supported builds of Windows 10 (version 1809 and later) and Windows 11. The scope is strictly limited to devices operating within environments that utilize intermediate network security appliances, such as Next-Generation Firewalls (NGFW), Secure Web Gateways (SWG), or corporate proxies performing Deep Packet Inspection (DPI). Devices connected directly to the internet without SSL inspection, or those using WSUS with a valid internal certificate chain, are generally immune to this specific error code unless BITS is corrupted.
The error is prevalent in tenant configurations where Microsoft Endpoint Manager (Intune) manages devices that traverse corporate egress points. It does not affect Windows Server Update Services (WSUS) deployments unless the WSUS server itself is behind a proxy that fails to pass authentication for the SYSTEM account. The scope includes both Azure AD Joined and Hybrid Azure AD Joined devices, as the underlying Windows Update Agent behavior remains consistent across enrollment types. However, it is less common in fully isolated air-gapped networks where no external connectivity exists.
Where To Look First: Logs and Event IDs
To diagnose 0x8024402F, you must inspect the Windows Update logs. In modern builds, these are aggregated via the Get-WindowsUpdateLog cmdlet or found in the event logs. The primary artifact is Event ID 25 in the System log. This event indicates that the Windows Update service encountered an error while processing updates. Look for the specific error code in the details pane.
The exact log path for detailed troubleshooting is %windir%\WindowsUpdate.log. You should grep this file for the string 0x8024402F to find the timestamp of the failure. Additionally, check the operational logs under Event Viewer > Applications and Services Logs > Microsoft > Windows > WindowsUpdateClient. Look for Event ID 20 (Download failed) or Event ID 19 (Download succeeded with errors). The log line will typically reference a failure in the "Handler" component, indicating that the download handler could not complete the transaction due to network or certificate issues.
Root Causes
SSL Inspection and Certificate Trust Failure
The most common cause is Deep Packet Inspection (DPI) by a firewall. When the firewall intercepts HTTPS traffic to windowsupdate.microsoft.com, it replaces Microsoft's leaf certificate with its own internal CA certificate. If the Windows Update Agent, running as the SYSTEM account, does not trust this internal CA, or if the certificate subject name does not match the expected endpoint, the TLS handshake fails. This results in 0x8024402F. You can distinguish this by checking if other HTTPS traffic works but Windows Update specifically fails.
Proxy Authentication Mismatch
If your environment uses a proxy that requires authentication, the Windows Update Agent may fail to pass credentials. The agent runs as SYSTEM, which often lacks the user context required for NTLM or Kerberos authentication against the proxy. This is evident if netsh winhttp show proxy shows a configured proxy but no bypass list for Microsoft endpoints. The error occurs because the agent cannot establish an authenticated tunnel to the update servers.
BITS Queue Corruption
The Background Intelligent Transfer Service (BITS) manages the actual download of update files. If the BITS queue becomes corrupted, it can return generic errors that manifest as 0x8024402F. This is less common but possible after a hard reboot or power loss during an update. You can identify this if restarting the BITS service resolves the issue temporarily.
Fix Procedure
- Verify Proxy Settings for SYSTEM Account: Open an elevated command prompt and run
netsh winhttp show proxy. If a proxy is configured, ensure that Microsoft Update endpoints are bypassed. Use the following PowerShell cmdlet to set the proxy bypass list:netsh winhttp set proxy proxy-server="http=: " bypass-list="*.windowsupdate.com;*.microsoft.com" - Reset BITS Queue: Stop the BITS service, delete the corrupted queue files, and restart the service. Execute these commands in an elevated PowerShell session:
Stop-Service -Name bits -ForceRemove-Item -Path "$env:ALLUSERSPROFILE\Microsoft\Network\Downloader\qmgr*.dat" -ForceStart-Service -Name bits - Synchronize System Time: Ensure the system clock is accurate to within 5 minutes of the domain controller or internet time server. Run
w32tm /resync /forcein an elevated command prompt. - Configure OMA-URI for Proxy Bypass (Intune): If managing via Intune, create a custom configuration profile. Navigate to
Intune admin center > Devices > Configuration profiles > Create profile. Select Windows 10 and later as the platform and Templates as the profile type. Choose "Custom" template. Add the following OMA-URI:./Device/Vendor/MSFT/EnterpriseModernAppManagement/WinHTTPProxySettingsSet the data type to String and value to{"proxyServer":"http://your-proxy:8080","bypassList":"*.windowsupdate.com;*.microsoft.com"}. - Clear Windows Update Cache: Stop the Windows Update service, delete the SoftwareDistribution folder contents, and restart the service. Use this PowerShell cmdlet:
Stop-Service -Name wuauserv -Force; Remove-Item -Path "C:\Windows\SoftwareDistribution\Download" -Recurse -Force; Start-Service -Name wuauserv
netsh winhttp affects all applications using the WinHTTP stack, including Microsoft Store and Office Click-to-Run. Incorrect bypass lists can break other services. Always test in a non-production environment first.
Error Code Variants
| Error Code | Description | Distinguishing Factor |
|---|---|---|
0x8024402F |
WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS | Network/SSL/TLS failure during download. Often proxy or firewall related. |
0x80240037 |
No updates to install | Success state. No action required. Distinct from 0x8024402F which is a failure. |
0x80070005 |
Access Denied | Permission issue. Usually related to registry keys or file system permissions for the SYSTEM account. |
0x8024402C |
WU_E_PT_HTTP_STATUS_BAD_REQUEST | HTTP 400 error. Usually indicates malformed request or server-side issue, not local network block. |
Verification
To verify the fix, force an update scan using PowerShell: Invoke-WUJob -ScanOnly. Monitor the results in Event Viewer. You should see Event ID 20 with a success status or Event ID 19 indicating successful download. Check the Windows Update log for the absence of 0x8024402F. Additionally, verify that the BITS service is running and has no queued errors by running Get-BitsTransfer -AllUsers | Where-Object { $_.JobState -eq 'Error' }. If this returns null, the queue is clean.
dsregcmd /status to verify device enrollment status and domain connectivity. While not directly related to Windows Update, it helps confirm that the device can communicate with Azure AD/Entra ID services, which often share network paths with update servers.
Prevention
To prevent recurrence, ensure that your corporate firewall or proxy explicitly whitelists all Microsoft Update endpoints: windowsupdate.microsoft.com, download.windowsupdate.com, ctldl.windowsupdate.com, and *.windowsupdate.com. Configure SSL inspection to bypass these domains entirely, allowing Microsoft's native certificates to be used without interception. Implement a Group Policy or Intune configuration profile to enforce proxy bypass settings for the SYSTEM account. Regularly monitor Event ID 25 in System logs across your tenant using Log Analytics or similar tools to detect early signs of network interference. Ensure that all devices maintain accurate time synchronization via NTP to avoid TLS handshake failures due to clock skew.